Blum Tip-On Touch Latch for Free Swinging DoorsBlum Tip-On Touch Latch Standard Duty

• Blum Tip-On cabinet touch latches open your cabinet door when you give the door a gentle push inward.
• For use with free swinging hinges only.
• Not for use with self-closing hinges. See our SKU G10008 for the same item for self-closing hinges.
• The Tip-On latch will push the door open wider than most other touch type latches.
• To close the cabinet door, simply push the door closed, a magnet at the end of the push rod will keep the door in the closed position.
• Made to be installed in frameless cabinets (cabinets without a face frame).
• May be installed in face frame cabinets by installing a block of wood behind the cabinet face frame.
• This product is sold in components. Please make sure to order one tip-On, one holder, and two screws per door.

Holders and Installation

• The Tip-On is available in two sizes:
  • Standard Duty, for door heights less than 48″. Blum 956.1004 / SKU 268814
  • Heavy Duty, for door heights 48″ or more. Blum 955A.1004 / SKU 268816
• The Holder is available in two types:
  • In-Line Type (screw holes are not visible). Blum 956A.1201 / SKU 268818
  • Wing Type (two attachment screw holes are visible). Blum 956A.1501 SKU 268820
• Tip on can be installed without a holder:
  • Drill a 10mm hole in the cabinet side panel
  • Install the “Tip On” in the 10mm hole
• Strike plates (a self-sticking plate and a screw on plate and screw) are included with the purchase of a Tip-On (SKU’s 268814 or SKU 268816).
• Screws are not included for either of the holders, however they are available to purchase separately. Order two #6 flat head screws (SKU 652360) per holder.

B10095