MEC ME1690 Excess Flow Pol Adapter 7/8 in. Hex Nut 1/4 in. Mpt

Warranty

5 years from manufacture date

Pack Size

1

UNSPSC

40171700

Product Overview

The ME1690 Pol adapters 1/4 in. male pipe fitting fits the inlet of all standard low pressure regulators. The Pol nut features a left hand thread and fits all standard LP gas cylinder valves. The excess flow Pol is different than standard POL fittings because it has a check valve inside. If gas surges through the fitting, the check valve will check. It does not shut off the gas but it does restrict the gas flow. Should an accident occur that would break the fitting off ahead of the regulator, or sever the hose the check valve would safety restrict the flow of escaping gas.

• Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
• Machined of solid brass
• 7/8 in. Hex nut
• 1/4 in. MNPT
• Excess flow Pol
• Caution: when installing the 1/4 in. male NPT into regulator inlet, it is recommended that teflon tape be used instead of the thread sealant, If thread sealant is used, extreme caution should be taken that no thread sealant that no thread sealant gets in the regulator inlet

These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov/chemicals