Task Lighting L-VTDK-16-30 16 Ft., 225 Lumens/Ft. 12-volt Standard Output Touch Dimmer Switch Tape Light Kit, Single-White, SoFt. White 3000K

• 36 diodes per foot (600 per roll) create even illumination
• UL Listed or recognized components to keep inspectors satisfied
• 90+ CRI tape light for true rather than faded colors
• 30,000 hour LED life at 70% lumen maintenance means long-lasting illumination
• 3M 300LSE waterproof adhesive tape for improved adhesive to surfaces, plus adhesive promotor surface preparation wipe included
• Aluminum housings available, ordered separately
• Dimmable with included touch dimmer switch
• IP65 rated protective micro waterproof coating for wet or damp locations
• field cuttable approximately every 1 inch for versatile installation

Voltage

12V DC

Application

Cabinets – under, above, interior. Accent, niche & back lighting

Location

Indoor, Outdoor

Installation Type

Surface

Warranty

5 Year

Operating Temperature

-4F to 140F (-20C to 60C)

Collection

Single Color Lighting Kit

Orientation

Vertical, Horizontal

Attachment Type

3M Ultra Bond Double Sided Adhesive

Environment

Tape Light – Dry, Damp, Wet. Remaining components Dry only

Dimmable

Dimmable with compatible dimmer or dimming system

Packaging Type

Small Package

CRI

90+

IP Rating

IP65

Lumens Per Watt

75

Watts per Foot

2.8

Driver

12V, Plug-in included

Freight Class

50

Diode Density

600 per roll

Installation Required

Yes

Item Class

LT-ILM

Item Overall Length Decimal in Inches

192

Item Projection Decimal in Inches

0.0625

Kelvin Temperature

Soft White 3000K

Lifespan

50,000 Hours

Lumens Per Foot

225

Minimum Cut Length

1″

Primary Material Details

Plastic

Rated Power

44.8

Switch Color

Satin Nickel

Product Overview Everything needed to install 1 zone and 1 area of 16 ft of 12-Volt 225 Lumens/Ft Single-White LED Tape Lighting with a wired Touch Dimmer Switch in one box. Contains one 16 ft roll of 12-Volt 225 Lumens/Ft Single-White LED Tape Lighting with 3M Ultra Bond double-stick tape for peel-and-stick installation, 60W power supply, two 6-packs of 8 mm-EZ connectors, 25ft of wire, touch dimmer switch, two each male/female barrel-to-wire connectors screwdriver, and adhesive promoter wipe. Cut the tape light to length to achieve beautiful, even lighting in any space. IP65 Waterproof rated tape light. Field cut at 2″ cut lines. On/off/dim functionality with included touch dimmer switch. Plug-in power supplies allow for installation without an electrician.